Shahjalal University of Science and Technology

Faculty Profile

Dr. A. B. M. Abdul Malek

Professor

Contact Information

Office Address: Professor Institute of Shahjalal University of Science and Technology, Sylhet-3114, Bangladesh
Phone: +8801791620777
Email: bashar@sust.edu, abmmalek@gmail.com

Biography

A. B. M. Abdul Malek is a Professor in the Department of Industrial and Production Engineering at Shahjalal University of Science and Technology (SUST), Bangladesh. He completed both of his B.Sc. in Mechanical Engineering and M.Sc. in Industrial and Production Engineering from Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh. He holds a PhD from Higher Institution Centre of Excellence (HICoE) named UM Power Energy Dedicated Advanced Centre (UMPEDAC), University of Malaya, Kuala Lumpur, Malaysia.
Dr. A.B.M. Abdul Malek is actively engaged in the area of renewable energy and supply chain management. His special interest is on the energy and environmental analysis of renewable energy based power generation system. In the arena of supply chain management he is interested on flexibility and sustainability issues for better business environment.
Dr. A. B. M. A. Malek is a regular course teacher in Supply Chain Management, Engineering Economy, Operations Management, Machine Tools, Productivity Management, and Energy Management.
He has published a number of good articles in the prestigious journals like, Journal of Cleaner Production, Renewable and Sustainable Energy Reviews, Solar Energy, Clean Technologies and Environmental Pollution, Energy and Environment, etc.

Education

Ph.D. in Renewable Energy, UM Power Energy Dedicated Advanced Centre (UMPEDAC), University of Malaya, Kuala Lumpur, Malaysia.
M.Sc. in Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh.
B.Sc. in Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh

Research Interests

Economic Analysis of Renewable Energy Systems
Environmental Impact Assessments of Renewable Energy Systems
Effectiveness of Solar PV generation in replacing grid electricity
Inventory management of multi-echelon supply chains
Supply Chain Flexibility Issues for Industry 4.0
Measuring the Flexibility Dimensions Important for Sustainable Supply Chain Management

Active Research Project

Experimental investigation on thermal degradation of solar PV module at outdoor conditions and the enhancement of module output using different cooling techniques
Application of Fuzzy Linguistic (FIS) in Assessment of Supply Chain Flexibility in RMG Sector of Bangladesh
Factor Analysis of Supply Chain Flexibility in Selected RMG Factories of Bangladesh
Campus E-Waste Management- An Investigation of Computer Peripherals in School of Applied Sciences and Technology
Ph.D. Research: Tentative Topic-Developing a Framework Model of Manufacturing Flexibility Assessment Justifying for Textiles and Clothing Industry of Bangladesh
Management of Municipal Solid Waste: An Exploratory Study in Sylhet City Corporation
Evaluating the Flexibility Dimensions in a Supply Chain by Fuzzy TOPSIS Approach: A Conceptual Model
Evaluating the Relationship and Prioritization of the Key Factors of a Sustainable Supply Chain: A DEMATEL based Analysis in selected Manufacturing Companies of Bangladesh
Finding out the Sustainable Ways to Reduce Waste in the Food Industry of Bangladesh: An Exploratory Study
Prospects of Lean Tools Applicaton for Productivity Improvement in RMG Sector
An Integrated Approach to Develop a Net-Zero Energy Buildings Framework for Sustainable Power and Energy

Previous Research Project

Design and feasibility study of a photovoltaic (PV) power generation system for a proposed Academic Building of SUST based on experimental investigation
1997 -1998 : Statistical Analysis of Wind Energy in Bangladesh, Funded by Directorate of Advisory Extension and Research Services (DAERS), BUET, Dhaka.
2000 - 2001: Implementation of Advanced Manufacturing Technology in Bangladesh: Case study and analysis in selected industries.
2001- 2002: Study of Inventory Systems in Selected Industries for Analysis and Improvement Strategy
2002 - 2003: A Study of Efficient Sales Forecasting: A pivot for decision making in the functional areas of business.
2002 - 2003: Food Safety and Environmental Aspects of Packaging Materials
2002 - 2003: An Approach for Improving the Line Efficiency for Increasing Productivity in a Television Assembly Line.
2002 - 2003: A study of Agro-based Production Line Analysis for Effective Utilization of Power.
2003 - 2004: Study of the Mechanism of Computer Numerical Control Machines and Their Prospect in Manufacturing Industries.
2004 - 2005: Placement of Safety Stock in Inventory Management System
2004 - 2005 :Capacity Planning Analysis: a case study in RMG industry for resource utilization
2004 - 2005: Study of the Impact of Industrial Engineering in Increasing Productivity of RMG Industries.
2004 -2005 : The Effects of Multi Fabric Agreement (MFA) on the Knitwear Sector of Bangladesh.
2005 -2006: Real Time Information Visibility and Its Impact on Supply Chain Dynamics.
2005- 2006: Capacity Planning Analysis: A case study with respect to utilization for a selected industry
2005-2006: Minimizing the Distribution Cost of a Beverage Industry
2005-2006: Sourcing in Practice: A case study
2006-2007: Real Time Information Visibility and It's Impact to Supply Chain Dynamics
2006-2007: Work Study Analysis in a Selected Garments Industry
2008-2009: Optimization of Multi-echelon Inventory System for Cost Effective Supply Chain
2009- 2010: Optimization of a Retail Shop Inventory: Customer service level perspective
2009-2010: Electricity Generation Through Community Basad Biogas Plant
2009-2010: Optimization of Inventory in a Multi-Echelon Environment Considering Target Service Level
2010-2011: QFD Approach to Measure Supply Chain Performance: A case study on garment accessories industries in Bangladesh
2010-2011: Software Based Evaluation of Overall Production Line Effectiveness (OPLE) of a Garment Industry
2010-2011: Productivity Improvement in Sewing Section of an Apparel Industry with the View of Cellular Manufacturing
2010-2011: Productivity Improvement of a Selected Sewing Line in a Garments Industry Applying Theory of Constraints (TOC) and Efficient Layout
2011-2012: Identification of Wastes in a Production Line of a Factory in RMG Sector Applying Value Stream Mapping: A case study
2011-2012: Modification of an Existing Distribution Channel for a Footwear Industry
2011-2012: Inventory Control of Raw Materials in a Cement Industry: An exploratory case study
2012-2013: Optimal Base-stock Policy for Inventory Management with Periodic Review: A case study in an oil refinery industry
2012-2013: Assessment of Production Line Performance of Sewing Operation Applying Analytical Hierarchy Process (AHP): A case study
2013-2016: Ph.D. Thesis ( University of Malaya, Kuala Lumpur) Topic: Energy, Economic and Environmental Analyses of Biomass based Power Generation in Malaysia
2016-2017: Spare Parts Inventory Analysis on Moving Items: A case study in a cement manufacturing company in Bangladesh
2016-2017: Optimization of Inventory using (R,S) Policy and Analyzing In-stock Probability, Out of Stock Probability and Back Order Cost: A Case Study
2016-2017: Extent of Lean Practices Implementation in Selective Garment Industries of Bangladesh: An exploratory study
2017-2018: An Appropriation of Forecasting Technique for Minimizing Inventory Costs
2018-2019: Application of AHP Approach in Supplier Evaluation and Selection for a PET Bottle Recycling Organization: A Case Study
2018-2019: Development of a Low Cost 3-Axis CNC Milling Machine for Machining Wood and MDF
2018 -2019: Inventory Control under Uncertain Demand for Pharmaceutical Products using Continuous Review Policy: A study for health care facility
2018-2019: Evaluation of Factors Causing Production Disruption using Fuzzy Analytical Hierarchy Process (AHP)
2019-2020: Factor Analysis of Supply Chain Flexibility in Selected RMG Factories of Bangladesh
2003-2004: Study the Effect of Cutting Parameters on Chip Formation and Tool Wear in Turning Mild Seel and Aluminum with Coated Carbide Tools Speeds on Surface Finish
2004-2005: Placement of Safety Stock in Inventory Management

Journal Publish

1. Unleashing the Power of Manufacturing Flexibility: Enhancing Performance in Bangladesh’s Ready-Made Garment Industry, Moin, Chowdhury Jony; Iqbal, Mohammad; Abdul Malek, . A.B.M.; Khan, Mohammad ; Haque, Rezwanul, Journal of Manufacturing Technology Management (JMTM)
2. Malek, A.B.M.Adul., M.M.A. Khan, and A. Sayem, Supply chain flexibility issues for Industry 4.0, in Advanced Signal Processing for Industry 4.0, Volume 2. 2023, IOP Publishing. p. 5-1-5-22 (Book Chapter)
3. Techno-Economic analysis of off-grid and grid-connected solar PV systems for an university building, M.A. Hossain, M.M. Hasan, A.B.M. Abdul Malek, I. Hossain, M.R. Chouwdhury, SUST Journal of Science and Technology, Vol. 33(1), pp. 5-12, ISSN. 2959-3522
4. Exploring the Manufacturing Flexibility Issues to Build a Framework to Implement the Manufacturing Flexibility of a Supply Chain: A Review
5. Prioritization of Environmental Uncertainty and Manufacturing Flexibility for Labor-Intensive Industry: A Case Study on Ready-Made Garment Industries in Bangladesh
6. Effects of simple cooling methods on power output and efficiency of solar panels in outdoor conditions
7. Solar irradiance measurement in Sylhet and performance evaluation of photovoltaic (PV) modules in outdoor conditions
8. Abdul Malek, A.B.M., Hasanuzzaman, M. & Rahim, N.A. (2020) Prospects, progress, challenges and policies for clean power generation from biomass resources. Clean Techn Environ Policy 22, 1229–1253, https://doi.org/10.1007/s10098-020-01873-4
9. Abdul Malek, A.B.M., Hasanuzzaman, M., Rahim NA, Al–Turki YA. (2020) Energy, economic, and environmental analysis of 10-MW biomass gasification based power generation in Malaysia. Energy & Environment. June 2020. doi:10.1177/0958305X20930386
10. Abdul Malek, A.B.M., Md. Mahraj Uddin, Golam Sakaline, (2020) Justifying Forecasting Methods to Minimize Inventory Costs of Fixed Life Perishable Items, International Journal of Scientific & Engineering Research Volume 11, Issue 1, January-2020 , pp.1519-1531
11. M. H. Kibria , M. M. A. Khan , A. B. M. A. Malek , and P. K. Biswas (2020) Inventory Cost Minimization Through Item Categorization and Demand Forecasting: A Case Study-based Approach, International Journal of Engineering Research and Technology (IJERT), Volume 08, Issue 12 (December 2019), http://dx.doi.org/10.17577/IJERTV8IS120386,
12. Chowdhury, J. M., Iqbal, M., Abdul Malek, A.B.M., and Haque, R. (2020) Time-Based Process Mapping for Lead Time Compression in the Apparel Supply Chain: A Case Study, International Journal of Mathematical, Engineering and Management Sciences (IJMEMES), Volume 5, Issue 1, 96-107, DOI: 10.33889/IJMEMS.2020.5.1.009
13. Muhammad M. Hasan, Md. Rabiul Hasan, Ranjit Biswas, ABM Abdul Malek, Md. Masum Parvej, (2019) Design and Feasibility Analysis of a Solar PV System for Street Lighting in a University Campus, International Journal of Science and Engineering Applications (IJSEA), Volume 08, Issue 09, https://dx.doi.org/10.7753/IJSEA0809.1006
14. Abdul Malek, A. B. M. , Hasanuzzaman, M., Rahim, N. A., & Al Turki, Y. A. (2017) Techno-economic analysis and environmental impact assessment of a 10 MW biomass-based power plant in Malaysia. Journal of Cleaner Production, pp. 502-513. DOI: https://doi.org/10.1016/j.jclepro.2016.09.057
15. Md. Ashrafuzzaman, Abdullah Al-Maruf, I.M. Mahbubul, A.B.M. Abdul Malek, and A.M.M. Mukaddes (2015) Quality function deployment approach to measure supply chain performance: a case study on garments accessories industries, International Journal of Industrial and Systems Engineering (IJISE), Volume 22, Issue 1, pp. 96 - 120, DOI: 10.1504/IJISE.2016.073262
16. Hasanuzzaman, M., Abdul Malek, A.B.M., Rahim, N.A., Al-Turky, Y. A., (2016) Global advancement of cooling technologies for PV systems: A review, Solar Energy, Volume 137, July 2016, pp. 25-45, DOI: 10.1016/j.solener.2016.07.010
17. M. Hosenuzzaman, N.A. Rahim, J. Selvaraj, M. Hasanuzzaman, Abdul Malek, A.B.M., and A. Nahar, (2014) Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation, Renewable and Sustainable Energy Reviews, Volume 41, pp. 284-297, ISSN 1364-0321, https://doi.org/10.1016/j.rser.2014.08.046
18. Mohd. Rifat Khan, Adnan Hasan, Shumon Kumar Ray, Anup Saha, A.B.M. Abdul Malek, (2013) Autonomous Order Processing System for Supply Chain Management- An Initiative to Match Demand and Supply for Processed Food Industries in Bangladesh, International Journal of Modern Engineering Research (IJMER), Volume 03, Issue 6, pp. 3348-3358
19. M. M.A. Khan, A. B.M. Abdul Malek, M. A.H. Mithu & D. K. Das (2010) Design, fabrication and performance evaluation of natural circulation rectangular box-type solar domestic water heating system, International Journal of Sustainable Energy, 29:3, 164-177, DOI: 10.1080/14786461003611584
20. S. Akhter, AFM Salahuddin, M. Iqbal , ABM A Malek, and N. Jahan (2010) Health and occupational safety for female workforce of garment industries in Bangladesh, Journal of Mechanical Engineering, Volume 41, Issue 1 (June 2010),pp.65-70, DOI: 10.3329/jme.v41i1.5364
21. M. M. Hasan, A. B. M. Abdul Malek, A. S. M. A. Haseeb, and H. H. Masjuki, (2010) Investigation, TiO2 and Ag Based Single and Multilayer-films for Window Glazing, Journal of Engineering and Applied Sciences, Volume 5 Issue 9 September 2010, pp.22-28
22. A. M. M. Mukaddes, C. A. A. Rashed, A. B. M. Abdul. Malek, M. J. Kaiser, and S.M. S. Alam (2010) Developing an Information Model for Supply Chain Information Flow and it's Management, International Journal of Innovation, Management and Technology, Volume 1 Issue 2, pp. 226-231
23. A. M. M. Mukaddes, C.A.R Rashed, and A.B. M. Abdul Malek (2010) Study on CNG filling station distribution in intercity network, Asian Journal of Energy and Environment, Volume 11, Issue 2. pp. 142-150.
24. IM Shahrul, MF Hasan, MAA Mamun, and ABM Abdul Malek (2007) Engineering e-Transaction (ISSN 1823-6379, http://ejum.fsktm.um.edu.my), Volume 2, Issue 2, December 2007, pp. 31-37

External Affiliations

Research Fellow in UM Power Energy Dedicated Advanced Centre (UMPEDAC), University of Malaya, Kuala Lumpur.
Reviewer at Clean Technologies and Environmental Policy
Member of Institute of Engineers Bangladesh (MIEB)
Member of Bangladesh Society of Mechanical Engineers (MBSME)
External Member of Ph.D. Thesis Evaluation and Defense- South Denmark University (SDU)

Awards & Recognition

2012-2013 : University of Malaya Research Grant (UMRG)
2013-2015: High Impact Research Grant (HIR), University of Malaya, Kuala Lumpur
2018-2020: Shahjalal University of Science and Technology Research Grant
1993-1998:Technical Education Scholarship, Bangladesh University of Engineering and Technology (BUET)
1986-1988: Talent pool Scholarship in Junior School Certificate Examination
1983-1985: Talent pool Scholarship in Primary School Certificate Examination
2016: Outstanding Reviewer Acknowledgement [https://doi.org/10.1007/s10098-016-1330-9]
2021: Deans Award for Research Excellence, School of Applied Sciences and Technology, SUST

Conference

1. Rajesh S. Rejon, Muhammad M. Hasan, Ahsanul Kabir, Md. T. Firdaus, and A.B.M. A. Malek, (2023) Solar irradiance measurement in Sylhet and Performance evaluation of photovoltaic (PV) modules in outdoor conditions, CD proceedings in the 7th International Conference on Engineering Research, Innovation and Education, January 12-14, 2023, Sylhet, Bangladesh, Page No. 1365-1370. (Paper no. ICERIE-2023-260).
2. Experimental Investigation of PV Cooling Methods using a Finned Heat Sink and Cotton Wicks
3. Hasan, M. M., Rejon, R. S., Rifat, A. A., Safwan, O. F. and Malek, A. B. M. A. Power output and efficiency enhancement of a Polycrystalline-silicon PV module using simple cooling methods. In the proceedings of 7th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2022), 22-24 December, 2022, Khulna, Bangladesh, Paper ID_076.
4. Solar Irradiance measurement in Sylhet and Performance evaluation of Pholotvoltaic (PV) modules in Outdoor Conditions (2021), Hasan* , M.M., Abdu Malek, A.B.M.., Talukder, M.I.A., Imon, A.N., Hossain, M.F., Published in the Proceedings of 6th International Conference on Engineering Research, Innovation, and Education (ICERIE 2021), 26- 28 February 2021, Sylhet Bangladesh, pp. 1328-1335
5. Renewable Energy in Bangladesh: Prospects and Challenges, (2020) Conference jointly organized by the Dept. of Chemical Engineering and Polymer Sciences (CEPS), Shah jalal University of Science and Technology, SUST, Sylhet and Bangladesh Energy and Research Council (BEPRC)), Ministry of Energy, Power, and Mineral Resources held on January 24 2020.
6. Rahman, T., Limon, M.M.R., Anzum, L., Malek, A.B.M. A (2019) Application of AHP approach in supplier evaluation and selection for a PET bottle recycling organization: A case study, Proceedings on International Conference of Engineering, Research, Innovation and Education, (ICEIE-2019), held on 13-15 January, 2019, at Shah Jalal University of Science and Technology, Sylhet, Bangladesh
7. M.A. Hossain, Mohammad M. Hasan, A.B.M. Abdul Malek, I. Hossain and M.R. Chowdhury, (2019) Design and feasibility study of a photovoltaic (PV) power generation system for a proposed academic building of SUST, CD proceedings of 6th International Conference on Engineering Research, Innovation and Education (ICERIE 2019), 25-27 January 2019, School of Applied sciences & Technology, SUST, Sylhet, Book of Abstracts pp.120.
8. Muhammad M. Hasan, A.B.M. Abdul Malek, M.A. Hossain, I. Hossain, and M.I.A. Talukder (2019) Experimental investigation of solar irradiation in Sylhet and feasibility analysis of a photovoltaic (PV) system, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) held in Chittagong University of Engineering and Technology (CUET) , Bangladesh on 11–13 December, 2019, (Paper no. ICMERE2019-PI-190)
9. Iqbal, M., Abdul Malek, A.B.M., Salma Akhter, Howladar, M. F., Shamsuzzoha, A.H.M., (2017) Study of Energy Utilization Scenario in Bangladesh, 10th International Conference on Thermal Engineering : Theory and Applications, Muskat, February 2017.
10. Aminul Islam, A.B.M. Abdul Malek, Mohammad Mahamud Hasan, (2017) Theoretical Model Development and Financial Analysis of Solar PV Systems for Irrigation and Water Transportation ,3rd I-Proclaim Annual Research Conference on Business, Humanity and Law (ARCBHL-2017), held at International Islamic University Malaysia (IIUM), Kuala Lumpur, Malaysia on 31st December, 2017.
11. Shantanu Barua, Noor A Mohammad Rono & A. B. M. Abdul Malek, (2017) Optimization of inventory using (R, S) policy and analyzing in-stock probability,out-stock probability and backorder cost for a retailer”, 4th International Conference on Engineering Research, Innovation and Education ( ICERIE 2017), held on January 11-13, 2017, at Shahjalal University of Science and Technology, Sylhet, Bangladesh
12. A.B.M. Abdul Malek, M. Hasanuzzaman, N.A. Rahim, and M. Hosenuzzaman, (2014) Review on biomass based power generation technologies in Malaysia, Proceeding of the 2nd Power and Energy Conversion Symposium ( PECS,2014), held on 12 May, 2014, at University Technikal Malaysia, Melaka, Malaysia. pp. 83-87
13. M.S. Hussain, A.B.M. Abdul Malek, Jeyraj Selveraj, and N.A. Rahim, (2014) Thermal Performance of Flat Plate Solar Water Heater Collector with Modified Circulating Pipe Absorber”, Proceeding of the 2nd Power and Energy Conversion Symposium ( PECS,2014), held on 12 May, 2014, at University Technical Malaysia, Melaka, Malaysia, pp.123-128.
14. M. Hosenuzzaman, N.A. Rahim, J. Selveraj, and A.B.M. Abdul Malek, (2014) Photovoltaic Prospect and Policies in Malaysia, Proceeding of the 2nd Power and Energy Conversion Symposium ( PECS,2014), held on 12 May, 2014, at University Technical Malaysia, Melaka, Malaysia, pp.105-110.
15. M.H. Farhad, A.B.M. Abdul Malek, M. Hasanuzzaman, and N.A. Rahim, (2013) Technical Review on Biomass Conversion Processes into Required Energy Form, IEEE Conference on Clean Energy and Technology (CEAT-2013), held in Pilao Langkaway, Malaysia, 19-21 November, 2013, pp.200-205.
16. M.H. Farhad, A.B.M. Abdul Malek, M.Hosenuzzaman, Mohomammad Mashud, and N.A. Rahim (2013) Analysis of Palm Oil Empty Fruit Bunches for MItigating Energy Demand of Malaysia and Indonesia, The Proceedings of 15th Annual Paper Meet, Mechanical Engg. Division , Institute of Engineers, Bangladesh (IEB), held in Dhaka on 27-28 December 2013.
17. M.S. Hossain, F. Fayaz, M.H. Farhad, A.B.M. Abdul Malek, and N.A. Rahim (2013) Thermal Performance of Flat Plate Solar Water Heater Collector with Modified Circulating Pipoe Absorber, Proceedings of 15th annual paper meet (APM -15), Mechanincal Engineering Division of IEB, held in Dhaka on December 27-28, 2013
18. A.B.M. Abdul Malek, Robin Bhuiyan, A.K.M. SirajunNuha, Abdullah Al Mamun (2011) Productivity Improvement through Cellular Manufacturing in RMG Industries: Bangladesh Perspective, Proceedings of the Conference on Engineering, Research, Innovation and Education (CERIE 2011), held in ,Shah Jalal University of Science and Technology, 11-13 January 2011, Sylhet, Bangladesh, pp. 826-832.
19. A.B.M. Abdul Malek, Dr. M. Iqbal, Muhammad Abdus Samad, Dr. M. Ahsan Akhter Hasin, (2011) Optimization of Supply Chain Inventory from Customer Service Level Perspective, Published in the proceedings of the Conference on Engineering, Research, Innovation and Education,(CERIE 2011), held in ,Shah Jalal University of Science and Technology, 11-13 January 2011, Sylhet, Bangladesh, pp.807-815
20. Md. Mamunur Rashid Ruskin, A.B.M. Abdul Malek (2011) Evaluation Of Overall Line Effectiveness (OLE) of a Garment’s Industry” Published in the proceedings of the Conference on Engineering, Research, Innovation and Education,(CERIE 2011), held in ,Shah Jalal University of Science and Technology, 11-13 January 2011, Sylhet, Bangladesh, pp.850-858
21. Md. Ashrafuzzaman, Abdullah Al Maruf, A.B.M. Abdul Malek, Dr. A.M.M. Mukaddes, (2011) QFD Approach To Study Customer Requirements, Critical Supply Chain Factors and a System for Supply Chain Performance Measure, Published in the proceedings of the Conference on Engineering, Research, Innovation and Education, (CERIE 2011), held in ,Shah Jalal University of Science and Technology, 11-13 January 2011, Sylhet, Bangladesh, pp.833-843
22. Mohammed Mahfuz Hossain, Md. Shahrul Islam, Dr. Md. Ariful Islam, and A.B.M Abdul Malek (2011) Application of Fixed Time Period Model for Optimizing Inventory Level: A Case Study in a Pharmaceutical Company”, presented in the Conference on Engineering, Research, Innovation and Education,(CERIE 2011) held on January 11-13,2011, at Shah Jalal University of Science and Technology, Sylhet, Bangladesh.
23. A.B.M. Abdul Malek ,Md.Mijanur Rahman, Md.Mamunur Rashid (2011) Change Over Time Reduction in Garments Industry through SMED Methodology”, presented in the Conference on Engineering, Research, Innovation and Education,(CERIE 2011) held on January 11-13,2011, at Shah Jalal University of Science and Technology, Sylhet, Bangladesh
24. Golam Kabir, M. Ahsan Akhtar Hasin, and A.B.M. Abdul Malek (2011) Improvement of Customer Perceived Quality of Synthetic Fiber Using fuzzy QFD: A Case Study” presented in the Conference on Engineering, Research, Innovation and Education,(CERIE 2011) held on January 11-13,2011, at Shah Jalal University of Science and Technology, Sylhet, Bangladesh.
25. A.B.M. Abdul Malek, M.A.A. Hasin, M. Iqbal, and C.A.A. Rashed (2010) Genetic Algorithm Based Multi-echelon Inventory Optimization: A Case Study for Serial Supply chain, Published in the proceedings of the Conference on Engineering, Research, Innovation and Education,(CERIE 2010) held on January 11-13,2010 at Shah Jalal University of Science and Technology, Sylhet, pp. 397-401.
26. A.B. M. A. Malek, M Haq, Md. Shah Milton and Md. Islam (2010) Optimization of a Retail chain Inventory: Customer Service Level Perspective, Published in the proceedings of the Conference on Engineering, Research, Innovation and Education,(CERIE 2010) held on January 11-13,2010 at Shah Jalal University of Science and Technology, Sylhet, pp. 592-597.
27. A.B. M. Abdul. Malek, M M A Khan, Farhad Hasan, and Tanim Jahan (2010) Evaluation of Solar Power Module: Cost Justification and Outsourcing Facilities, Published in the proceedings of the Conference on Engineering, Research, Innovation and Education (CERIE 2010) held on January 11-13,2010 at Shah Jalal University of Science and Technology, Sylhet, pp. 526-530.
28. A.B.M. Abdul Malek, Md. Ahsan Habib, and M. A. Islam (2010) Optimization of Inventory of a Retail Chain Inventory: Customer Service Level Perspective, Published in the proceedings of the Conference on Engineering Research, Innovation and Education (ICERIE 2010), held on January 11-13 ,2010, School of Applied sciences & Technology, SUST, Sylhet, pp. 598-602.
29. H H Masjuki, A S M A Haseeb, M M Hasan, and A B M Abdul Malek (2010) Mechanical Properties of RF-Sputtered Nano-structured Tungsten Oxide Thin Film, Published in the Proceedings of the Conference on Engineering Research, Innovation and Education (ICERIE 2010), 11-13 January 2010, at School of Applied sciences & Technology, SUST, Sylhet, pp.124-129
30. Salma Akhter, A.F.M. Salahuddin, M. Iqbal, and A.B.M. Abdul Malek (2010) Health and Safety Issues for Female Workforce of Garment Industries in Bangladesh, Published in the Proceedings of the International Conference on Industrial Engineering and Operations Management (IEOM) held on January 9-10, 2010 at Islamic University of Technology (IUT), Gazipur, Dhaka.
31. A.H.M. Shamsuzzoha, Abdul Malek, A.B.M., and M. Iqbal (2010) Global Outsourcing Strategy: Product Development Perspective, published in the Proceedings of Industrial Engineering and Operatons Management (IEOM 2010) held on January 9-10, 2010 at Islamic University of Technology (IUT), Gazipur, Dhaka
32. Md. Anisul Islam, A.B.M. Abdul Malek, and Chowdhury M. Lutfur Rahman (2006) A study of Efficient Sales Forecasting: A Pivot for Decision Making in the Functional Areas of a Business”, published in the Proceedings of 11th Annual Paper Meet 25-26 December, 2006-Organized by Mechanical Engineering Division, Institute of Engineers Bangladesh (IEB),Ramna, Dhaka-1000.
33. Abdul Malek, A.B.M., Khan M. M. A ,and Md. Mustafizur Rahman (2002) Green House Gas(GHG) Emission: Bangladesh Perspective, published in the proceedings of 2nd International Conference and 7th Annual Paper Meet of the Mechanical Engineering Division, Institute of Engineers Bangladesh (IEB), on February 15,2002, ISBN 984-31-1526-0, Paper No.29, pp. 227-236,
34. Rahman Md. Mustafizur, Khan M. M. A., Abdul Malek A.B.M. (2001) A strategic Approach of Environmentally Clean Machining, published on the proceedings of 2nd International Conference on Mechanical Engineering (ICME2001, Dhaka), December 26-28, 2001, ISBN 984-32-0038-1, Vol. 3, pp. 49-54.
35. Rahman Md. Mustafizur, Abdul Malek A.B.M., and Khan, M. M. A. (2001) Vision of the Future: Engineering Design Environment, published in the Proceedings of 2nd International Conference on Mechanical Engineering (ICME2001, Dhaka), held on December 26-28, 200, ISBN 984-32-0038-1, Vol. 1.

Teaching

Supply Chain Management
Operations Management
Engineering Management
Productivity Management
Energy Management ( for Masters)
Engineering Economy
Machine Tools
Engineering Materials
Organizational Behavior
Production System Optimization
Technology Management
Advanced Manufacturing Systems
Quality Control and Management

Graduate Supervision

Manufacturing Flexibility and Its Measures for RMG Industry - Ph. D. Thesis (Awarded)
Improvement of an Existing Inventory System of Garments Industry- Masters ( General) Completed in September, 2019