Faculty Profile

Dr. Mst. Nasima Bagum

Professor

Contact Information

  • Office Address: Department of Industrial & Production Engineering, Shahjalal University of Science and Technology, Sylhet-3114, Bangladesh
  • Phone: +8801617535997
  • Email: nasima-ipe@sust.edu

Biography

Dr. Mst. Nasima Bagum is a Professor in the Department of Industrial and Production Engineering, Shahjalal University of Science and Technology (SUST), Sylhet, Bangladesh. She completed her PhD in Engineering focused on Advanced Machining of difficult to cut materials, from International Islamic University, Malaysia. During her PhD, she accomplished two international projects under Ministry of Higher Education, Malaysia. She received her M.Sc. in Industrial and Production Engineering from Bangladesh University of Engineering and Technology (BUET). Her MSc research concentrates on multi-attribute decision analysis regarding renewable energy adaptation.
She has published articles in various national and international journals both in the field of Manufacturing and Industrial Engineering, e.g., International Journal of Advanced Manufacturing Technology, Arabian Journal of Science and Engineering, International Polymer Processing, Key Engineering Materials, International Journal of Industrial and Systems Engineering, Jordan Journal of Mechanical and Industrial Engineering, The International Journal of Science, Mathematics and Technology Learning; International Journal of Industrial and Systems Engineering, ARPN Journal of Engineering and Applied Sciences, Review of General Management, International Journal of Scientific and Engineering Research, Journal of Engineering and Technology etc. Her research has been presented in quite a number of international conferences, such as proceedings of International Conference on Advances in Manufacturing & Materials Engineering, International Conference on Science & Engineering of Materials, Machine Intelligence and Emerging Technologies etc.
Her research interests include Manufacturing (Conventional and Advanced); Operations management, particularly on multi-criteria decision analysis; Operations Research; Simulation.

Education

  • PhD (Engineering, International Islamic University Malaysia)
  • M.Sc. Engineering (Industrial and Production Engineering, BUET, Bangladesh)
  • B.Sc. Engineering (Industrial and Production Engineering, SUST, Bangladesh)

Research Interests

  • Manufacturing Engineering (Conventional and advanced)
  • Industrial Engineering (Operations Management, Operations Research, Simulation)

Active Research Project

  • 1. Thermal effect on material removal in machining non-metallic material funded by Research Centre, Shahjalal University of Science & Technology, [2022-2023], AS/1/2022/41

Previous Research Project

  • 1. Microchannel fabrication on non metallic material using laser beam machining funded by Research Centre, Shahjalal University of Science & Technology, [2021-2022], AS/1/2021/36
  • 2. Course dropout at Undergraduate level in Engineering Discipline- Current Scenario, Causes and Consequences funded by Research Centre, Shahjalal University of Science & Technology, [2020-2021], AS/1/2020/50
  • 3. Service Time Reduction of Health Care Facility through the Application of Lean Tools funded by Research Centre, Shahjalal University of Science & Technology, [2019-2020], AS/1/2019/41
  • 4. Machinability Analysis and Development of Analytical Model in High Speed Machining of Brittle Materials funded by Ministry of Higher Education, Malaysia [2014-2017].
  • 5. Influence of Machining Parameters on Tool Wear in High Speed machining of Glass funded by International Islamic University Malaysia [2015-2017].
  • 6. Feasibility of Wind Pumping for Irrigation in Bangladesh, using Multi-Attribute Decision Analysis funded by Bangladesh University of Engineering and Technology [2009-2010].
  • 7. The Application of Quality Function Deployment (QFD) to Improve the Teaching Techniques in Higher Education in the Department of IPE, SUST.
  • 8. Developing a Model on Factory Information System in the Department of IPE, SUST.
  • 9. Selecting Best Suited Location for Special Economic Zone (SEZ) in Sylhet using AHP in the Department of IPE, SUST.
  • 10. The impacts of Assembly Line Balancing in Apparel Supply Chain in the Department of IPE, SUST.
  • 11. Study of the Mechanism of Computer Numerical Control Machine Tools and Its Prospect in Manufacturing Industries in the Department of IPE, SUST.

External Affiliations

  • Member of Institution of Engineers, Bangladesh (IEB)

Journal Publications

  • 1. Mst. Nasima Bagum, Md. Ahsan Habib, Choudhury Abul Anam Rashed*, Md. Mehedi Hasan Kibria,Syeda Kumrun Nahar. (2024) Optimizing laser-based micro-cutting for PMMA microfluidic device fabrication: thermal analysis and parameter optimization. International Polymer Processing. 39 (2), 220-236, https://doi.org/10.1515/ipp-2023-4408
  • 2. Choudhury Abul Anam Rashed, Mst. Nasima Bagum, Md. Mehedi Hasan Kibria, Rafid Ahmed Chowdhury, Md. Ariful Islam (2024). Integrating Supply Chain Partners through Implementing Industry 4.0 Technologies to Enhance Competitiveness. Jordan Journal of Mechanical and Industrial Engineering, 81(2), 351-363. https://doi.org/10.59038/jjmie/180208
  • 3. Choudhry Abul Anam Rashed, S.H. Sakib, Md. Shahidul Islam, Mst. Nasima Bagum. (2024) Streamlining Service Time: Integrating VSM and Simulation Modeling in the Service Sector. The International Journal of Science, Mathematics and Technology Learning, 31(1), 472-485. https://doi.org/10.5281/zenodo.11309485
  • 4. Mst. Nasima Bagum, Syeda Kumrun Nahar, M. A. Islam, M. M. H. Kibria, C. A. A. Rashed. (2023) Academic withdrawal in engineering: an investigation of scenarios and root causes. The International Journal of Science, Mathematics and Technology Learning, 30(2), 89-116.
  • 5. C.A.A. Rashed, M.N. Bagum, M. Haque. (2023) Readiness Towards Industry 4.0 of Selected Industrial Sector, Machine Intelligence and Emerging Technologies. MIET 2022 (Book Chapter). Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 491, 659-673.https://doi.org/10.1007/978-3-031-34622-4_52
  • 6. C.A.A. Rashed, M.N. Bagum, R.A. Noshin. (2023) Causes and consequences of bullwhip effect on the boutique industry of Dhaka city. Accounting, vol 9 (4), 203-214.https://doi.org/10.5267/j.ac.2023.8.001
  • 7. C.A.A. Rashed, M.N. Bagum, M. Haque. Adoption of Technology and Innovation in Manufacturing Sector- Current Scenario. Journal of Industrial Engineering and Its Application, Vol. 7, No. 1, pp. 1-17, 2022
  • 8. M. N. Bagum, M. Roy, S. Mazumder. Company Readiness towards Green Manufacturing- A Case Study in Ready Made Garments. Journal of Engineering Research, Innovation and Education, Vol. 3, No. 2, pp. 12-22, 2021
  • 9. Mst. Nasima Bagum, Mohamed Konneh, “The Influence of Cutting Parameters on Tool Wear in Ductile Machining of Soda Lime Glass”, Journal of Material Science and Manufacturing Technology, Vol. 4, Issue 3, pp. 1-22, 2019.DOI: http://doi.org/10.5281/zenodo.3403802
  • 10. Mst. Nasima Bagum, Mohamed Konneh, A. K. M. Nurul Amin, “Prediction and experimental validation of temperature rise in ductile mode end-milling of soda lime glass”, The International Journal of Advanced Manufacturing Technology, Vol. 96, Issue 9-12, pp. 3437-3447, 2018. https://doi.org/10.1007/s00170-018-1833-0
  • 11. C.A.A. Rashed, Mst. Nasima Bagum, Jahid Hasan, Jafor Ahmad, “Service time reduction through facility re-location of existing hospital facilities, Journal of Transportation Engineering and its Applications, Vol. 3, Issue 1, pp. 1-11, 2018
  • 12. Mohamed Konneh, Mst. Nasima Bagum, A. K. M. Nurul Amin, Amira Fatin Asyah, “Investigation of Heat Assisted High Speed End Milling of Soda Lime Glass for Surface Generation”, Key Engineering Materials, Vol. 740, pp. 145-151, 2017. https://doi.org/10.4028/www.scientific.net/KEM.740.145
  • 13. A. K. M. Nurul Amin, Mst. Nasima Bagum, Noor Fathiah, Mohamed Konneh, T. F. Bt. Mohamed Ariff, “An Experimental Approach to Determine the Critical Depth of Cut in Brittle-to-Ductile Phase Transition during End Milling of Soda-Lime Glass”, Arabian Journal of Science and Engineering, Vol. 41, Issue 11, pp. 4553-4562, 2016. https://doi.org/10.1007/s13369-016-2174-7
  • 14. Nasima Bagum, A. K. M. Nurul Amin, Mohamed Konneh, Noor Fathiah, “Multi-Response Optimizations for High Speed Ductile Mode Machining of Soda Lime Glass”, Asian Research Publishing Network (ARPN) Journal of Engineering and Applied Sciences, Vol. 10, No. 23, pp. 17341-17350, 2015
  • 15. Mst. Nasima Bagum, C. A. A. Rashed, “Multi-Criteria Analysis for the Selection of Location for Distribution Center Using Analytical Hierarchy Process”, Review of General Management, Vol. 20, Issue 2, pp. 67-82, 2014
  • 16. Nasima Bagum, C. A. A. Rashed, Abdulla Rasel, “Location Selection by AHP for Special Economic Zone”, Review of General Management, Vol. 17, Issue 1, pp. 119-127, 2013
  • 17. A. M. M. Mukaddes, Nasima Bagum, Md. Anisul Islam and M. M. A. Khan, “The application of quality function deployment to improve the teaching technique in higher education”, International Journal of Industrial and Systems Engineering, Vol. 11, Nos. 1/2, pp. 97-109, 2012. https://doi.org/10.1504/IJISE.2012.046657
  • 18. Nasima Bagum, A. A. Rashed, A. K. M. Masud, Md. Quamrul Islam, “Using multi- Criteria Analysis in Decision Making Regarding the Adoption of Wind Pump for Irrigation in Bangladesh”, Review of General Management, Vol.15, Issue 1, pp. 157-178, 2012
  • 19. Md. Ariful Islam, Mst. Nasima Bagum, C. A. A. Rashed, “Operational Disturbances and Their Impact on the Manufacturing Business- An Empirical Study in the RMG Sector of Bangladesh”, IRACST- International Journal of Research in Management and Technology (IJRMT), Vol. 2, No.2, pp. 184-191, 2012
  • 20. C. A. A. Rashed, Mst. Nasima Bagum, S. Khan, M. Hasan, “A Model on Factory Information System (FIS)”, Review of General Management, Vol.14, Issue 2, pp. 139-150, 2011
  • 21. M. N. Bagum, A. K. M. Masud, M. Q. Islam, C. A. A. Rashed, “An Investigation of Wind Power Utilization for Irrigation in Bangladesh”, Journal of Engineering and Technology, Vol. 8, No. 1, pp. 01-12, 2010

Conference

  • 1. Mohamed Konneh, Mst. Nasima Bagum, Tasnim Firdaus Bt. Mohamed Arif, Mohammad Yeakub Ali, “Machinability of Soda Lime Glass in High Speed End Milling”, IOP Conference Series: Materials Science and Engineering, Vol. 290, 2018, 012036
  • 2. M.N. Bagum, M. Konneh, K.A. Abdullah, M.Y. Ali, “Chip morphology as a performance predictor during high speed end milling of soda lime glass”, IOP Conference Series: Materials Science and Engineering, Vol. 290, 2018, 012037
  • 3. Mst. Nasima Bagum, Mohamed Konneh, Mohammad Yeakub Ali, “Establishing Relationship between Process Parameters and Temperature during High Speed End Milling of Soda Lime Glass”, IOP Conference Series: Materials Science and Engineering, Vol. 290, 2018, 012038
  • 4. Mohamed Konneh, Mst. Nasima Bagum, Mohammad Yeakub Ali, Tasnim Firdaus Bt. Mohamed Arif, “Tool Wear Mechanisms during Cutting of Soda Lime Glass”, IOP Conference Series: Materials Science and Engineering, Vol. 290, 2018, 012039
  • 5. Mohamed Konneh, Mst. Nasima Bagum, Mohammad Yeakub Ali, and A. K. M. Nurul Amin, “Surface morphology study in high speed milling of soda lime glass”, AIP Conference Proceedings 1958, 020005 (2018)
  • 6. Mst. Nasima Bagum, Mohamed Konneh, “Effect of HSM on MRR and Surface Quality in Milling Soda-lime Glass”, Proceedings of 7th International Conference on Postgraduate Education, Universiti Teknologi MARA (UiTM), Shah Alam, Malaysia, 1st December 2016.
  • 7. AMM Mukaddes, MN Bagum, MA Islam, MA Bashar, V Chakrabarty, “Translating the Student’s Voice into Teaching Techniques: A Quality Function Deployment Approach”, Proceedings of International Conference on Industrial Engineering and Operations Management, Vol. 11, Issue1/2, pp. 223-230, 2010.

Teaching

  • Undergraduate level: Machine Tools (Theory and Sessional) both at SUST and IIUM, Manufacturing Processes- I & II, Operations Research, Product Design & Development, Operations Management, Fluid Mechanics & Machinery, Thermodynamics, Engineering Materials
  • Masters level: Innovative Production Techniques, Quantitative Techniques, Statistical Quality Control, Quality Planning & Management

Awards & Recognition

  • 2021-2023: SUST Research Grant, Bangladesh
  • 2020-2021: SUST Research Grant, Bangladesh
  • 2019-2020: SUST Research Grant, Bangladesh
  • 2014-2018: Research grant as Teaching Assistant and Research Assistant from International Islamic University Malaysia (IIUM) and Ministry of Higher Education, Malaysia.
  • 2009-2010: Research grant for M.Sc. Engineering Thesis, Bangladesh University of Engineering and Technology (BUET).
  • 1999-2002: Technical Scholarship, Shahjalal University of Science & Technology, Bangladesh.
  • 1991-98 : Bangladesh Government Merit Scholarship

Graduate Supervision

  • 1. Supervising the theses at the M.Sc. Engineering and B.Sc. Engineering levels.
  • 2. A Masters (General) project titled 'Identifying Challenges and Resolving Them to Optimize Inventory Management of Dairy Products" at the Department of IPE, SUST, was completed.
  • 3. A Masters (General) project titled 'Micromachining of Non-Metallic Material' at the Department of IPE, SUST, was completed.
  • 4. MSc Engineering Thesis titled Prospects and Challenges of the Industry 4.0 implementation in selected Industrial Sectors of Bangladesh, Completed (Co- supervisor)
  • 5. I am available for PhD supervision.